专注生产各类管材生产线

详细说明

管链输送机

收藏
  • 商品说明

特点 Features:


1.结构紧凑,占用空间小,可以三维改变输送方向。

2.输送物料封闭在管路中输送。避免物料受外界环境污染。

3.物料输送时没有压力,出口不必设置除尘器。

4.物料沿着管道平滑输送,物料破损少。

5.物科靠刮板向前低速推进,避免了气力输送过程中出现的混合料分离现象。

6.特别适合于使用单一原料的塑料挤出机供料,可设置多个进、出料口。

7.多余的原料通过环形管路返回,不需要在输送末端加装回料斗。

8.能耗最低--运行成本最经济,整套系统只有一个电机来带动。


1.Compact structureand small space occupation able to change the direction of transportaton in three dimensions.

2.Materials conveyed are sealed in the pipeline to avold environmertal pollution.

3.No pressure when corvering materials, so there is no need to set dust ollector at the outiet.

4.The material is transported along the pipeline smoothly with little damage.

5 The material is pushed forward at low speed by armored face to avoid the separaticnof mixture in the process of pneumatic conveying.

6.It is especially suitable for the feeding of plastic extruder with single raw material, and multiple inlet and outlet ports can be set.

7.Excessive raw materials are returned through the loop pipeline, no need to install a return hopper at the end of the conveying.

B.The lowest energy consumption--tne most economical operation cost. Only one motor to drive the whole system


通用配置 Suitable Configuration:


1.材质:

a.壳体、管路与物料按触部份SS304;

b.链条: SS3D4;

c.链板:尼龙;

2.配齿轮减速机,功率接实际工况定; .

3.联轴器传动;

4.进、出料口可接用户要求制作;

5. NSK轴承、TTO油封;

6.出料口上有铰接的观察盖,方便观察物料输送情况。


1. Material: 

a. shell,pipeline and parts contacting material SS304;

b. chains:SS304

c. chain plate: nylon;

2. Equipped with gear reducer and its powe is subject to the actual working condition:

3. Coupling drive;

4. The inlel and outlel ports can be customized;

5. NSK bearings, TTO oil seal;

6. A hinged observation cover set on the outlet port to facilitate the observalion of material transportation.

联系热线:18915471918

公司邮箱:389464608@qq.com

公司地址:江苏省苏州市张家港市锦丰三兴五棵松路

在线表单提交
更多
您的姓名
您的电话 *
备注内容

张家港市繁昌机械有限公司

扫描二维码

添加微信咨询

客服中心
联系方式
189 1547 1918
扫一扫,添加微信
×
seo seo